Size: 10.5"W x 3.5" Dx 10.5" H ; 5.4 quart capacity Puncture-resistant red plastic for safety Locking lid secures sharps for disposal For professional medical waste use only Quantity: 12 containers per bulk case The Medical Action Industries Medegen Sharps Container is an indispensable safety component engineered for the secure disposal of contaminated medical waste within professional healthcare and institutional environments. Featuring a substantial 5.4 quart capacity, this container is optimally designed for use in patient rooms, procedure areas, and phlebotomy stations where medium-volume disposal of needles, syringes, and other sharp instruments is required.Constructed from robust, puncture-resistant plastic, the container is clearly visible with its distinguishing red base and is labeled with the appropriate biohazard symbols to ensure rapid identification and compliance with strict safety protocols.3 The unit's precise dimensions of 10.5" W x 3.5" D x 10.5" H make it a space-efficient choice that can be conveniently placed on counters, carts, or secured to a wall using compatible brackets, which maintains a safe distance from patients and staff during procedures. Crucially, the container is equipped with a secure horizontal entry, locking lid that allows for safe, one-handed disposal and can be permanently sealed once it reaches the designated fill line, a critical feature for safe transport and final disposal. Each purchase is supplied in a case quantity of 12 containers, ensuring professional facilities are well-stocked to maintain continuous safety standards.If you are searching for the best Medegen Sharps Container for secure, mid-capacity, point-of-use sharps disposal, then its combination of a puncture-resistant body, highly visible red color, and permanent locking mechanism to prevent accidental re-opening is best for you. This specialized product is intended solely for bulk purchase and utilization by licensed medical facilities, clinics, and professional environmental services, and is not sold directly for consumer use.

Read more less

800 mg spill supports large restorations Premium alloy delivers high strength results Smooth handling aids condensation and carving Quantity: 500 alloy spills per jar The DMG America Zenith Premium Alloy 3 Spill 800 mg FS 500/Jar is engineered to provide dependable strength, consistent handling, and predictable clinical performance for high load bearing amalgam restorations. Each 800 mg spill is precisely premeasured to support accurate trituration and efficient placement, making it well suited for larger posterior restorations where material volume and durability are critical.If you are wondering what the DMG America Zenith Premium Alloy 3 Spill 800 mg FS 500/Jar is used for, it is intended for restorative procedures that require dense condensation, strong marginal adaptation, and long term wear resistance in molars and other stress bearing areas. The premium alloy formulation supports smooth mixing and controlled working time, allowing you to carve and contour restorations with confidence while maintaining consistent physical properties. Its reliable handling characteristics help reduce chairside variability and support standardized restorative outcomes across multiple cases.Supplied in a bulk jar containing 500 spills, this format supports high volume practices by improving inventory efficiency and reducing restocking frequency. The sealed spill design helps maintain material integrity while supporting safe, organized handling during preparation. From routine posterior fillings to complex restorations requiring greater material mass, it is the best dental amalgam alloy option for practices seeking strength, consistency, and workflow reliability, and it is also the best premium amalgam alloy solution for teams focused on efficiency, accuracy, and proven restorative performance.

Read more less

Diameter: 1.6mm head, 6.0 mm short working length Short shank is best for posterior access Pointed Taper shape(1716.6) makes precise gingival margins Medium grit balances quick cut and smooth finish Quantity: Pack of 25 diamond burs The Microcopy NeoDiamond #1716.6 Medium Grit Pointed Taper Short Shank Diamond Burs are premium, single-use rotary instruments engineered specifically to provide superior access and control in restricted or posterior oral areas where a standard length bur may be cumbersome. Classified as a Short Shank (SS), this bur is designed for enhanced visibility and minimized risk of soft tissue impingement, making it ideal for procedures requiring a shorter tool.The bur features a distinctive Pointed Taper shape, which is exceptionally effective for creating precise, well-defined gingival and axial wall reduction, and establishing shoulder or deep chamfer margins for indirect restorations like crowns and bridges. It utilizes a reliable medium grit (indicated by the blue color-coded shank) which offers an excellent combination of quick, aggressive cutting and the ability to leave a smoother, more refined surface finish. This diamond is meticulously manufactured to precise specifications, featuring a head diameter of 1.6 mm at its widest point and a reduced working head length of 6.0mm for controlled maneuvering.If you are searching for the best NeoDiamond Short Shank Pointed Taper medium grit bur then its utilization of Triton? bonding technology, which embeds 20% more natural diamond onto a Swiss-made, concentric stainless steel shank for maximized longevity and cutting sharpness, is best for you. Each instrument is strictly gamma-sterilized and individually sealed, guaranteeing a consistently sterile, high-performance instrument for every procedure. This product ensures the highest level of efficiency and cross-contamination control, provided in a generous quantity of 25 single-use burs per package.

Read more less

Measurement: 2.3 mm round bur RASL shank fits low-speed latch handpieces #8 classic round shape carbide is perfect for oral surgery Single-piece design resists breakage and chatter Quantity: Each box includes 25 sterile, individual burs The Microcopy NeoBurr #8 RASL is a premium, sterile, single-use carbide bur specifically engineered for demanding surgical and operative procedures, offering enhanced access and visibility. This specialized Right Angle Surgical Length (RASL) bur features a classic round shape and a substantial 2.3 mm head diameter (2.3 mm), making it an indispensable tool for efficient bulk reduction, bone smoothing, and creating deep access in oral surgery.The extended surgical length of the shank allows for exceptional reach into posterior and difficult-to-access areas, ensuring superior clinical outcomes where standard length burs cannot easily reach. Crafted from high-quality tungsten carbide, the single-piece construction of the NeoBurr line is designed to eliminate the common point of bur breakage associated with traditional welded burs, significantly increasing the instrument's durability and providing maximum cutting integrity throughout the entire procedure. This robust design guarantees minimal vibration and chatter, translating to a smoother and more efficient operation while reducing patient discomfort.The bur utilizes a sharp, 6-blade design that ensures a fast, clean, and cool cut with reduced clogging, maintaining optimal efficiency even during challenging bone removal or cavity preparation. Each NeoBurr #8 RASL is gamma-sterilized, individually packaged, and clearly labeled, simplifying inventory management and strictly adhering to the highest standards of safety and infection control in your practice. The generous head diameter of 2.3 mm is perfect for rapidly widening access, preparing large cavities, and performing initial bone recontouring, providing excellent tactile feedback for the operator.If you are searching for the best surgical length round carbide bur then the NeoBurr's superior single-piece design, which delivers break-resistant confidence and consistent cutting performance in deep surgical sites, is best for you. This essential instrument is provided in a convenient pack of 25 burs, ensuring your operatory is equipped with the ultimate tool for predictable and smooth surgical results. The surgical length right angle (RASL) shank is designed for use with low-speed handpieces, providing the controlled power necessary for surgical procedures

Read more less

Measurement: Head diameter is 1.2mm, length 3.8mm #58 straight fissure cuts fast and cleanly Use for precise cavity prep and clean line angles FG shank ensures stable high-speed performance Quantity: 50 bur pack The Microcopy Neoburr FG #58 Straight Fissure Carbide Bur, supplied in a cost-effective 50-pack, is an indispensable tool in the armamentarium of licensed dental professionals for core operative and restorative procedures. This workhorse bur is recognized by its classic cylindrical, non-crosscut plain-fissure design, designated as size #58, which is meticulously engineered for rapid and efficient cutting with minimal heat generation.The robust construction and geometry of the carbide ensure exceptional strength and concentricity, providing a smooth, chatter-free experience that is critical for operator control and reducing the risk of micro-fractures in the tooth structure. The #58 bur is perfectly suited for a multitude of tasks, including initial cavity preparation, creation of retentive features, and establishing precise, clean internal line angles and flat pulpal floors. Key specifications for this standard operative bur include a head diameter of approximately 1.2 mm and a uniform cutting length of about 3.8 mm.Consistent with Microcopy's commitment to infection control and performance, these burs are provided as gamma-sterilized, single-patient-use instruments. The Friction Grip (FG) shank is standard length and designed for a stable, secure fit in any high-speed handpiece, which is essential for maximizing cutting accuracy. If you are searching for the best straight fissure plain cut carbide bur for achieving precise, parallel axial walls and sharp internal anatomy during amalgam or composite cavity preparations, then the reliable cutting performance and renowned strength of the NeoBurr FG #58 is best for you.These generous 50-packs ensure clinicians have an ample supply of sharp, sterile burs readily available for high-volume practice efficiency.

Read more less

Measurement: 0.9mm head diameter, 3.4mm length #699 shape is a flat-end tapered crosscut fissure Friction Grip (FG) shank fits standard handpieces Tungsten carbide construction ensures fast, smooth cutting Quantity: 50 single-use carbide burs per pack The Microcopy NeoBurr #699 FG Flat-End Taper Crosscut Fissure Carbide Bur is a premium operative instrument designed for precise and rapid material removal in general dentistry. This single-patient-use bur comes in a generous pack of 50 burs, promoting superior infection control and guaranteeing a sharp, efficient instrument for every patient procedure.Crafted from high-quality, fine-grain tungsten carbide, the bur?s cutting blades are significantly sharper and more durable than those made from coarser materials, ensuring a consistent cut and extended service life. The bur features a standard Friction Grip (FG) shank for use in high-speed handpieces. The signature #699 shape is a flat-end taper fissure with a crosscut design, which is highly effective for conservative preparations, crown preps, and creating retentive grooves.According to the NeoBurr carbide chart, this bur features a head diameter of approximately 0.9 mm and a cutting length of about 3.4 mm, providing the ideal dimensions for detailed, controlled preparation work. The finely engineered crosscut blades and proprietary blade geometry minimize the common issue of chatter and vibration, resulting in a notably smoother and faster experience for both the patient and the clinician. If you are searching for the best Microcopy NeoBurr #699 taper fissure bur then its combination of fine-grain tungsten carbide, precise flat-end tapered shape, and single-use sterility is best for you, ensuring predictable, high-quality restorations and greater clinical efficiency.This product is strictly intended for use by licensed dental professionals and is distributed exclusively through authorized dental supply channels.

Read more less

Measurement: 1.8 mm diameter and a 3.7 mm length #7106 features a 12-blade Flame shape Made from strong tungsten carbide Uses a standard Friction Grip (FG) shank Quantity: Package contains 25 sterile, single-use burs The Microcopy NeoBurr #7106 Trimming & Finishing Bur is an exceptionally specialized instrument engineered from the highest quality, fine-grain tungsten carbide, a material chosen for its unparalleled strength and ability to hold a razor-sharp edge. This precise construction ensures a smooth, non-chattering cut, significantly reducing heat generation and patient discomfort while delivering a superior surface quality on composite, amalgam, and porcelain restorations.The bur features the signature Flame shape with an advanced 12-blade configuration this high blade count is crucial for fine-tuning the anatomy and achieving the mirror-like polish essential for an aesthetically pleasing and clinically sound restoration. The unique design also effectively blends restorative material into the natural tooth structure, eliminating the prominent grooves and markings that fewer-bladed burs often leave behind. The dimensional control offered by this specific flame shape is optimized for precision work, featuring an approximate head diameter of 1.8 mm and a functional cutting length of about 3.7 mm.It is equipped with the standard Friction Grip (FG) shank for secure and efficient use in any high-speed dental handpiece. For maximal clinical safety and efficiency, the bur is supplied as a sterile, single-patient-use instrument in a package containing 25 burs. If you are searching for the best Microcopy NeoBurr Trimming & Finishing Bur then its specialized 12-blade flame configuration, precise 1.8 mm diameter, and single-use sterility make it the ideal instrument for achieving unparalleled control and a predictable mirror-like finish, ensuring the longevity and aesthetics of your restorations.

Read more less

Measurement: 1.6 mm diameter, 4.3 mm cutting length It features a Taper Fissure Crosscut design (#702) Made from strong, fine-grain tungsten carbide Uses a standard Friction Grip (FG) shank Quantity: Package contains 50 sterile, single-use burs The Microcopy NeoBurr #702 Taper Fissure Crosscut Carbide Bur is an elite operative instrument engineered for rapid and efficient material removal in various dental procedures. Designed for exceptional cutting efficiency and stability, this bur is the ideal choice for conservative preparations, developing retentive grooves, and precise contouring of occlusal surfaces.The bur features the highly effective Taper Fissure Crosscut shape, which is known for its aggressive cutting capability and ability to minimize clogging. Constructed from premium, fine-grain tungsten carbide, the cutting blades maintain superior sharpness and durability far beyond what is offered by coarser materials, ensuring a consistent and predictable clinical outcome. This operative instrument features a standard Friction Grip (FG) shank for reliable performance in high-speed handpieces.The signature #702 shape has an approximate head diameter of 1.6 mm and a versatile cutting length of around 4.3 mm (for surgical length variant, standard length may vary but the product code suggests the regular FG length), providing the optimal dimensions for controlled and detailed preparation work. It is conveniently supplied as a single-patient-use bur in a pack of 50 burs, promoting superior infection control standards and guaranteeing a sterile, sharp instrument for every patient. The proprietary blade geometry and concentric design are specifically engineered to significantly reduce issues of chatter and vibration, resulting in a noticeably smoother and faster experience for both the patient and the clinician during demanding operative procedures.If you are searching for the best Microcopy NeoBurr crosscut taper fissure bur then its efficient 1.6 mm diameter, superior tungsten carbide construction, and sterile single-use packaging offer an ideal combination of cutting speed and clinical precision, making it a valuable tool for high-quality restorative dentistry.

Read more less

Measurement: 0.8mm, #34 size Carbide construction ensures rapid, controlled cutting Superior concentricity offers a smooth, reliable action Ideal for restorative and endodontic procedures Quantity: Pack includes 50 (FG) burs The Microcopy Neoburr #34 is a premium dental rotary instrument, conveniently provided in a package of 50 burs, ensuring dental practitioners have a plentiful and dependable supply for their daily procedures. These fine-grain carbide burs are expertly manufactured for rapid, controlled cutting, minimizing heat generation and patient discomfort.This makes them ideal for conservative preparation techniques and accessing difficult areas. The best Microcopy Neoburr #34 is widely recognized for its superior strength and concentricity, which translates into an exceptionally smooth cutting action that reduces chair time. Its round head design is perfectly suited for initiating a cut, removing decayed tissue, and creating retentive features.The friction grip (FG) shank ensures a reliable and secure fit in all standard high-speed handpieces, making it a trustworthy tool for general restorative and endodontic applications. The approximate diameter of the head of the Neoburr #34 is typically around 0.8 mm, a precise size that allows for meticulous and minimally invasive tooth preparation. If you are searching for the best round carbide bur then its unmatched ability to provide quick access to the dentin-enamel junction and perform initial excavation with maximum clinical precision, is best for you.Dental professionals rely on the consistent quality and performance of Microcopy burs to achieve predictable, successful clinical outcomes. This product is strictly intended for purchase and use by licensed dental professionals and is distributed exclusively through authorized dental supply channels.

Read more less

Measurement: 1.2 mm head diameter, 3.8 mm length #1171 Round End Tapered Fissure shape Engineered for fast, smooth, and precise cutting Reduces vibration for maximum patient comfort Quantity: Pack includes 50 carbide burs The Microcopy NeoBurr #1171 is a premium Friction Grip (FG) carbide bur engineered for single-patient-use, delivering powerful and precise cutting performance for a variety of dental operative procedures. The best NeoBurr #1171 carbide bur features an advanced design including a carefully structured blade, optimal rake angle, flute depth, and spiral angulation, which collectively ensure a fast, cool, and exceptionally smooth cutting experience with minimal vibration when subjected to the high rotational speeds of a dental hand-piece.This superior balance and reduced chatter significantly enhance both the efficiency of the procedure and the overall comfort for the patient. Manufactured with a high-quality tungsten carbide tip brazed to a surgical grade stainless steel stem (or sometimes with a single-piece construction for select shapes), the NeoBurr is designed for exceptional strength and durability, minimizing the risk of breakage, which can often occur at the weld point in lesser-quality alternatives. This particular operative bur is a #1171 Round End Tapered Fissure shape, making it ideally suited for creating initial access, preparing cavity forms, and defining the axial walls during restorative procedures.The head diameter of the #1171 bur is typically 1.2 mm, with a head length of approximately 3.8 mm, adhering to strict tolerances for concentricity to ensure predictable results every time. Each package contains 50 pre-sterilized, individually wrapped burs, emphasizing the single-patient-use protocol for maximum infection control and consistent, out-of-the-package sharpness.

Read more less

Measurement: 1.2 mm diameter, 3.4 length #7803 bullet shape, single-use for infection control Carbide construction prevents fracture, offering durability 12 blades trim precisely and reduce heat buildup Quantity: 25 burs are provided in each package The Microcopy NeoBurr Friction Grip (FG) Trimming and Finishing Bur #7803 is a premium, 12-bladed carbide bur featuring a distinctive bullet shape. This shape is meticulously engineered to provide dental professionals with exceptional control for fine contouring, interproximal reduction, and achieving superior final finishes on various restorative materials, including composite, amalgam, and enamel.Manufactured by Microcopy, these burs are constructed using high-quality, fine-grain tungsten carbide, known for its consistent sharpness and edge retention. The bur's design incorporates single-piece construction and often Microcopy?s innovative Blended Neck technology, which maximizes strength and significantly reduces the risk of bur breakage or fracture, a critical feature for high-speed applications. The 12 spiral blades are configured to offer a smooth, clean cut, minimizing heat generation, chatter, and material clogging, thereby accelerating the final finishing process.Each bur features a precise 1.2 mm head diameter and a head length of 3.4mm, ensuring controlled, predictable results when used in a standard friction grip handpiece. If you are searching for the best NeoBurr finishing burr then this sterile, single-use bullet shape, which provides unmatched control for intricate contouring and polishing, is best for you. The NeoBurr #7803 provides consistent, optimal performance for every patient, promoting the highest standards of safety and infection control through its gamma-sterilization and single-use protocol.This product is an essential tool for practices focused on achieving flawless aesthetic results, delivered in a practical quantity of 25 burs per pack.

Read more less