Anterior position, blue color coded for fast ID Peel-and-stick adhesive secures digital sensors firmly Single-use disposable, eliminates cross-contamination Compatible with EzAim anterior positioning arm Universal fit for most digital sensor sizes Quantity: 100 per pack Pac-Dent EzAim Disposable Adhesive Sensor Holder, Anterior, Blue, 100/Pack is used for anterior periapical radiograph positioning in general practice, orthodontic, and specialist dental settings where a single-use, peel-and-stick sensor holder eliminates the cross-contamination risk and reprocessing burden of reusable film-holding devices while maintaining precise, repeatable sensor alignment across every patient in the schedule. Color-coded Blue to designate the Anterior indication within the EzAim system, these holders are the patient-contact disposable component of a complete color-coded positioning workflow that includes matching Blue Anterior positioning arms and autoclavable aiming rings, allowing dental assistants and hygienists to select and assemble the correct holder, arm, and ring combination at a glance without risking cross-configuration with posterior, bitewing, or endodontic components.Practices that have transitioned from reusable film holders to the EzAim adhesive system find the anterior Blue holder the highest-volume single-use component in their daily imaging consumable inventory. ? Each pack contains 100 individual disposable holders, sized for anterior periapical imaging and pre-loaded with a peel-and-stick adhesive backing that attaches directly to the flat face of a digital sensor, PSP plate, or conventional film. The adhesive technology firmly secures the sensor to the holder without clips, slots, or mechanical retention mechanisms that can add bulk to the sensor profile or require separate sensor insertion steps. Once the adhesive tab is applied and the holder is seated with the positioning arm and ring in place, the sensor is held stably in position throughout exposure without the operator needing to maintain pressure or manual contact. ? The EzAim adhesive holder works by transferring the sensor alignment function from a reusable clamp or bite block to a color-coded, single-use tab that connects the sensor to the positioning arm and ring system for tube head alignment.This eliminates the cross-contamination pathway inherent in reusable sensor holders that require barrier coverage and surface disinfection between patients, replacing it with a per-patient disposable that is removed and discarded with the holder after each exposure. The patient-friendly profile of the adhesive holder reduces intraoral bulk compared to bite block-style holders, and the ability to manage the holder with hemostats during endodontic or surgical procedures allows use in restricted access situations where direct finger manipulation is not practical. ? Dental assistants and RDHs managing full-schedule hygiene and restorative imaging days find the 100-count Blue anterior pack integrates into the standard per-patient setup workflow without added complexity, reducing per-patient imaging preparation time compared to disinfecting and re-barreling reusable holders. The EzAim system's compatibility with all major digital sensor brands means the same Blue anterior holder serves any sensor platform without requiring separate holder formats for different sensor types. ? Pac-Dent EzAim Disposable Adhesive Sensor Holder, Anterior, Blue delivers the sensor alignment precision of a fully integrated positioning system in a single-use, color-coded format that removes the infection control and preparation complexity of reusable anterior film holders from the daily imaging workflow.For practices ordering dental x-ray positioning supplies and sensor holder consumables, the 100-count Blue anterior pack provides a practical option for the most frequently imaged zone in the dental radiograph series.

Read more less

One size fits all, universal barrier Adhesive tab prevents slipping from camera Guarantees crystal-clear image quality No image distortion Safe 'n' Sure OPT Phosphor Plate Envelope includes cardboard inserts to efficiently secure OpTime Soredex or plates with magnets. Unique, self-sealing EZ-GLIDE tab accelerates and eases loading. Soft material and rounded corners add to patient comfort. Available in #s 0-3, in a convenient storage container for maximum accessibility.

Read more less

Outer fabric made from Polyurethane coated anti-microbial fabric (Soft T-Touch) Gentle feel material, supple and easy to clean Low Maintenance Bright colors and ergonomic design Medical grade 0.3mm Lead Sturdy, comes with easy to hang loops The X-Ray Lead Apron provides complete protection for your patient with a 0.3 Medical grade lead. The outer fabric from a polyurethane coated anti-microbial. It has a gentle soft feel material that is flexible and is easy to clean. Available with or without a collar.

Read more less

For anterior use Ensures consistently high image quality Requires 60% less exposure compared with other films Maintains its speed and contrast across different conditions The Insight Single Dental Film Paper is an F speed film that minimizes the exposure of patients and operators to radiation by up to 60% without compromising the quality of the resulting image. Each film is manufactured with the T-Grain emulsion technology to ensure a consistently top-quality image resolution. The film self-adjusts to any type of chemistry or processing conditions without requiring any manual adjustments in radiographic equipment.

Read more less

Ideal for manual-type processing tanks Easy to use Formula 2000 Plus Cleaning Agent is ideal for manual-type processing tanks, Peri-Pro transports, and roller-type processors. It dissolves stubborn algae, dirt, stains, and other deposits for hassle-free removal. Each Twin Pack contains 2 (1 L) Formula 2000 Plus, 2-Sponges, and 1-Spatula.

Read more less

Compatible with Dentsply, Kodak, Sirona, and Air Techniques Made of soft vinyl Prevents cross-contamination Easy to open Defend Barrier Envelope holds and protects Dentsply, Kodak, Sirona, and Air Techniques phosphor plates in various sizes. It prevents cross-contamination and features tear-away open tabs for ease of usage. The barrier envelope is manufactured with soft vinyl with no sharp corners for maximum patient comfort.

Read more less

Bitewing position, yellow color coded for fast ID Adhesive backing locks digital sensor securely in place Single-use, no sterilization between patients Universal fit for most digital intraoral sensor sizes Works with EzAim bitewing positioning arm and ring Quantity: 100 per pack Pac-Dent EzAim Disposable Adhesive Sensor Holder, Bitewing, Yellow, 100/Pack is used for bitewing radiograph positioning in dental practices where a single-use adhesive sensor holder format replaces reusable bitewing tabs and film holders with a per-patient disposable that eliminates sensor contamination risk and removes disinfection and barrier management steps from between-patient imaging preparation. Color-coded Yellow to identify the Bitewing indication within the EzAim positioning system, these holders pair with the matching Yellow Posterior EzAim positioning arm and autoclavable aiming ring to form a complete, color-coordinated bitewing setup that allows dental assistants to assemble the correct configuration without referencing a separate identification chart or sorting through mixed-indication components during a high-volume recall appointment schedule.Dental hygienists and dental assistants running bitewing series across a full day of hygiene appointments find the Yellow adhesive holder a practical, infection-control-sound replacement for reusable bitewing components that require barrier placement and surface disinfection between every patient. ? Each pack contains 100 individual disposable holders, formatted for bitewing imaging and pre-loaded with a peel-and-stick adhesive backing that attaches directly to the active face of a digital sensor, PSP plate, or conventional bitewing film. The adhesive firmly secures the imaging medium to the holder without mechanical clips or retention slots that can add profile bulk in the posterior buccal corridor or create sensor seating variability across patients with different arch widths and buccal tissue depths. Once the holder is adhered to the sensor and connected to the Yellow positioning arm and ring, the assembled unit positions the sensor in the correct vertical and horizontal orientation for a parallel bitewing exposure without requiring the patient to bite down on a foam block or wing extension that adds intraoral pressure in the posterior.The 100-count pack covers a high-volume recall day across a single hygienist or multiple assistants sharing the same sensor and positioning kit. ? The EzAim adhesive holder system works by making the sensor holder a single-use patient-contact consumable rather than a reusable component requiring infection control management. Each Yellow bitewing holder is used once, contacts one patient, and is discarded after the exposure series, removing the contamination pathway that reusable bitewing tabs introduce when they are re-barreled or disinfected between patients. The peel-and-stick tab transfers from its backing to the sensor face in a single motion, connects to the positioning arm without tools, and the entire assembly disengages and discards in the same step at the end of the appointment.The holder is compatible with all major digital sensor brands and sizes currently in clinical use, meaning practices running different sensor platforms across operatories can standardize on a single holder per indication without purchasing sensor-specific consumables. ? Dental hygienists managing full recall schedules find the Yellow bitewing holder streamlines their between-patient sensor prep to a single disposable swap rather than a multi-step disinfection and re-barreling sequence, contributing meaningful time savings across a day of four to six bitewing series. Dental assistants supporting restorative and diagnostic appointments requiring bitewing imaging find the color-coded Yellow system reduces setup errors during time-pressured room turnovers. ? Pac-Dent EzAim Disposable Adhesive Sensor Holder, Bitewing, Yellow gives dental practices a single-use, color-coded bitewing positioning consumable that improves infection control compliance, reduces between-patient imaging preparation time, and delivers consistent sensor alignment across all sensor types within the EzAim positioning system. For practices ordering dental x-ray sensor holder supplies and bitewing imaging consumables, the 100-count Yellow pack provides a practical option for one of the highest-frequency radiograph procedures in the daily clinical schedule.

Read more less

Offers enhanced radiograph protection For the processing of rollerless-type films Ready for use Peri-Pro is a liquid concentrate used in the development of rollerless automatic films. With its anti-oxidation properties, Peri-Pro allows the radiograph to have a longer life as the fixer solution washes off without any hassle. This pack contains six 1-quart bottles of developer.

Read more less

Helps in making accurate diagnoses Easy-to-use film Ideal for both manual and automated processing Captures even the minutest details The DF-42 Ultra-Speed Single Dental Film delivers images with superior quality, high contrast, and granular details that help operators in making error-free diagnoses for their patients. This D speed film is suitable for all processing methods whether it be manual or automatic.

Read more less

Holds films and PSP envelopes Made of heavy duty paper board Non-reusable Comes in two sizes Loop EZ is a bitewing made from durable paperboard and designed to loop around films and PSP envelopes. Available in adult and child sizes.

Read more less

Secure Hold: Reliable adhesive for stable sensor placement. Pack Size: Includes 100 holders. Color-Coded: Red for easy identification. Disposable: Hygienic and convenient. Compatible: Suits digital X-Ray sensors. The EzAim Disposable Adhesive Sensor Holder in Red is an essential accessory for enhancing your digital X-ray imaging process. Specially crafted for posterior use, these sensor holders offer reliability and convenience with their adhesive design, ensuring accurate sensor placement every time.With a pack of 100, this product allows for efficient, single-use application, reducing the need for sensor repositioning.

Read more less

Guarantees remarkable clarity Rounded edges ensure user comfort Designated area for recording patient information Easy to use Perfect Pocket Film X-Ray Mount has a thin plastic construction to ease loading and a transparent window to enhance radiograph viewing. Available in various types and sizess.

Read more less