$41.22

• Lubricant spray for turbines, contra-angles, micromotors
• Applied after Spraynet cleaning; before autoclave cycling
• Cleans irrigation canals; dissolves impurities in channels
• Compatible with Lubrimed grease for ball-bearing lubrication
• Suitable for implantology instruments; 500ml aerosol can
• Quantity: 1 per Unit

Bien-Air Lubrifluid Handpiece Lubricant Spray, Pre-Sterilization, 500ml is used for internal lubrication of dental turbines, contra-angles, Bien-Air micromotors, air motors, straight and contra-angle attachments, and quick-connect couplings after the Spraynet internal cleaning step and before autoclave sterilization in the Bien-Air four-line instrument maintenance sequence, where applied lubricant oil protects rotating bearings, moving mechanical components, and instrument channel surfaces from the friction and wear that occur under repeated high-speed rotation without adequate lubrication across daily clinical use cycles. Applied as the lubrication stage following internal cleaning with Spraynet, Lubrifluid delivers the oil film to bearing surfaces, gear trains, and internal mechanical contact points that the sterilization cycle and subsequent clinical use require to be lubricated for the instrument to function correctly and maintain its designed service life across repeated autoclave and use cycles.

Dental assistants and sterilization technicians responsible for daily handpiece reprocessing find Bien-Air Lubrifluid the OEM-validated lubrication product that positions correctly in the instrument maintenance sequence between the cleaning and sterilization steps. ? Each unit is a single 500ml aerosol can of Lubrifluid lubricant spray, classified as a limited quantity hazardous material for transportation purposes and shipped by ground carrier only. Lubrifluid is positioned as the lubrication stage in the Bien-Air four-line maintenance protocol, working alongside Spraynet for internal cleaning, Aquacare for waterline rinsing, and Lubrimed for medical-grade bearing grease application where specific instruments benefit from a combined Lubrifluid spray and Lubrimed grease maintenance approach for optimal bearing protection. Each application of Lubrifluid delivers a fine lubricant oil mist into the instrument's internal channel through the spray nozzle directed at the instrument's lubrication port, coating internal surfaces without excess oil accumulation that could affect instrument balance or spray contaminate the autoclave chamber during the sterilization cycle. ? Lubrifluid works by delivering its aerosol lubricant formulation into the internal mechanical spaces of the handpiece or rotary instrument, where the fine oil mist penetrates to bearing surfaces, rotating shaft contacts, gear engagement zones, and channel walls, forming a protective lubricant film that reduces metal-to-metal friction during the instrument's next period of clinical rotation.

Alongside its primary lubrication function, Lubrifluid cleans irrigation canals within the instrument body and dissolves residual impurities that remain in instrument channels after the initial Spraynet cleaning step, providing a secondary cleaning action at the lubrication stage that contributes to comprehensive internal instrument hygiene before autoclave processing. For instruments with ball bearings at turbine heads and micromotor spindles, Lubrifluid can be used in combination with Lubrimed medical grease applied separately to the bearing surfaces, where the Lubrifluid spray addresses the broader internal lubrication requirement and the Lubrimed grease provides the denser, more persistent bearing-specific lubrication that high-speed ball bearings require for full protection across autoclave cycling and clinical use loads. ? Dental assistants managing the handpiece reprocessing protocol across a full daily instrument load find Lubrifluid's aerosol spray format delivers consistent internal lubrication in a single directed spray application at the lubrication port without disassembly, manual oil application, or maintenance equipment beyond the spray can itself. Equipment managers overseeing handpiece maintenance programs for multi-operatory practices find that consistent Lubrifluid application in the correct maintenance sequence position, after cleaning and before autoclave cycling, is the handpiece maintenance practice most directly associated with extended bearing and gear service life across turbines and micromotors in daily clinical rotation. ? Bien-Air Lubrifluid Handpiece Lubricant Spray gives dental practices an OEM-validated aerosol lubricant for turbines, contra-angles, micromotors, and air motors with secondary internal cleaning action, irrigation canal flushing, compatibility with Lubrimed bearing grease, and implantology instrument suitability in a 500ml can that fits the lubrication step in the Bien-Air four-line instrument maintenance protocol between internal cleaning and autoclave sterilization.

For dental offices ordering handpiece lubricant supplies for active daily instrument reprocessing programs, Lubrifluid delivers the bearing protection, internal channel lubrication, and OEM maintenance sequence compatibility that complete handpiece care requires.