$31.57

• For Midmark M9 and M11 autoclaves; fill and vent screens
• Mesh style; replaces Midmark OEM part 002-0360-00
• Required for autoclave operation; must not be omitted
• Part of Midmark M9 and M11 monthly maintenance protocol
• Cross-references RPI MIF062; DCI-manufactured
• Quantity: 2 per Pack

DCI International Midmark Fill and Vent Chamber Screen Filters are used for replacing the mesh screen filters at the fill and vent positions within the Midmark M9 and M11 autoclave steam sterilizers as part of the required monthly maintenance protocol for these units where the screen filters trap particulate debris and scale deposits from the chamber water during the sterilization cycle, preventing the fill and vent valve seats and orifices from becoming blocked by debris that could interrupt correct chamber filling, venting, and pressure management during the sterilization cycle sequence. The fill and vent chamber screen filters are a required component of the Midmark M9 and M11 autoclave's water management system and the sterilizers must not be operated without the filters in place, as confirmed by Midmark's own maintenance documentation, making replacement of these screen filters at the recommended maintenance interval a necessary part of maintaining the autoclave's operational compliance and sterilization cycle reliability.

Mesh style construction provides the open screen geometry that allows water to flow freely through the filter during the chamber fill and vent cycle steps while trapping particulate debris from the chamber water supply at the filter mesh surface, preventing debris from reaching the valve seats and orifices at the fill and vent positions within the autoclave's hydraulic circuit. Sterilization coordinators, dental assistants, and equipment technicians who maintain Midmark M9 and M11 autoclaves and perform the monthly maintenance protocol required by Midmark find DCI International Midmark Fill and Vent Chamber Screen Filter the mesh-style OEM-specification 2-pack replacement screen filter for their active Midmark M9 and M11 autoclave maintenance program. ? Each pack contains 2 individual DCI International Midmark Fill and Vent Chamber Screen Filters in mesh style, providing the pair of replacement filters needed for replacing both the fill position screen and the vent position screen in the Midmark M9 or M11 autoclave during the monthly maintenance procedure. DCI International manufactures this screen filter to meet the original Midmark OEM specification for the M9 and M11 fill and vent chamber screens, providing a DCI-manufactured aftermarket replacement that performs to the same mesh dimensions and flow characteristics as the Midmark OEM part number 002-0360-00.

The DCI part number 2320 cross-references to Midmark OEM part 002-0360-00 and RPI part number MIF062, supporting procurement verification when ordering the replacement screen filters for the Midmark M9 or M11 autoclave in service. ? DCI International Midmark Fill and Vent Chamber Screen Filters work through their mesh screen construction where the filter is seated at the fill and vent positions within the autoclave's internal water circuit and allows water flow through the open mesh openings during the chamber fill and vent steps while the mesh captures particulate scale, mineral deposits, and debris from the water flowing through the screen during each sterilization cycle. Over time, accumulated deposits and debris on the screen mesh surface restrict the screen's flow capacity and require the screen to be replaced at the maintenance interval to restore unrestricted flow through the fill and vent circuit. The mesh style screen construction provides the required flow-through geometry for the Midmark M9 and M11 fill and vent positions and is the correct filter type confirmed by the Midmark OEM part number cross-reference. ? Sterilization coordinators who perform the monthly maintenance protocol for their Midmark M9 and M11 autoclaves and include fill and vent screen replacement in the monthly maintenance checklist find the 2-pack format provides both replacement screens needed for the M9 or M11 filter replacement step within a single pack.

Equipment technicians who perform preventive maintenance service on Midmark M9 and M11 autoclaves include fill and vent screen replacement as a standard step in the monthly preventive maintenance procedure. ? DCI International Midmark Fill and Vent Chamber Screen Filters give dental practices a DCI-manufactured, OEM-specification mesh-style replacement screen filter for the fill and vent positions of Midmark M9 and M11 autoclaves, cross-referencing Midmark OEM part 002-0360-00 and RPI MIF062, required for autoclave operation and monthly maintenance compliance, in a 2-filter pack.