$60.62

• Microbial formula dissolves vacuum line debris
• Neutral pH of 6-8 supports Dental Rule use
• Works with wet and dry dental vacuum systems
• Compatible with all amalgam separator systems
• One ounce makes 32 ounces of working solution
• Quantity: 1 per Pack

Solmetex PowerScrub Vacuum Line Cleaner, 64 fl oz is used for routine cleaning of dental evacuation lines where accumulated organic debris can interfere with suction performance and equipment maintenance. The concentrated microbial formula releases specific enzymes that begin breaking down vacuum line buildup on contact and continue working while the solution remains in the lines overnight.

Its 100% biodegradable formulation supports daily maintenance without requiring hot water, and it works across a range of water temperatures. By helping remove debris from evacuation tubing, PowerScrub supports cleaner lines, more consistent suction, and better protection for connected vacuum equipment and amalgam separators. Each bottle contains 64 fluid ounces of concentrated cleaner. The manufacturer?s directions specify mixing 1 fluid ounce of concentrate with 32 fluid ounces, or approximately 1,000 mL, of water for one operatory.

For two operatories, 2 fluid ounces are mixed with 64 fluid ounces of water. The formula has a neutral pH between 6 and 8 and is designed for use with wet-ring and dry dental vacuum systems. It is also compatible with amalgam separators, including the Solmetex NXT Hg5 series.

Practices looking to buy dental vacuum line cleaner should confirm the number of operatories being serviced and follow the manufacturer?s dilution and daily-use directions. PowerScrub works by placing an active microbial and enzyme-based solution into the evacuation lines after dilution. The mixed solution is drawn through both the low-volume and high-volume evacuator lines, where it contacts accumulated debris inside the tubing. The formulation remains in the system overnight for continued cleaning action and rinses away during subsequent use.

No hot water is required, which simplifies preparation and supports consistent use across different equipment-room setups. As a neutral-pH evacuation system cleaner, it is formulated to clean without relying on acidic or strongly alkaline chemistry that may be unsuitable for amalgam separator workflows. Dental assistants, hygienists, office managers, and equipment coordinators can incorporate PowerScrub into the practice?s daily closing protocol. The cleaner is appropriate for operatories using saliva ejectors, high-volume evacuation lines, wet-ring vacuums, dry vacuums, and compatible amalgam separators.

Staff can measure the required concentrate, dilute it with water, and draw the solution through the evacuation lines using the appropriate dispenser and manufacturer procedure. Solmetex identifies PowerScrub as the only vacuum line cleaner it recommends for its NXT Hg5 amalgam separators. Continuous use may also extend the NXT Hg5 separator warranty from two years to five years when the manufacturer?s requirements are followed. Solmetex PowerScrub Vacuum Line Cleaner combines a concentrated 64 fl oz format, neutral-pH chemistry, biodegradable microbial action, and broad dental vacuum compatibility in one maintenance product. One ounce produces 32 ounces of working solution, helping practices prepare the correct volume for each operatory without unnecessary product use. Its overnight cleaning action supports a repeatable maintenance routine while helping protect suction performance, vacuum equipment, and amalgam separator operation. Professionals ready to shop for dental vacuum line cleaner can select PowerScrub when they need a concentrate that works with wet or dry systems, requires no hot water, and integrates into routine end-of-day evacuation line care