$77.72

• For Midmark M11 and M11D autoclaves; 3-piece kit
• Includes 1 door gasket, 1 dam gasket, and 1 hoop
• DCI-manufactured; meets Midmark OEM specifications
• Replaces Midmark OEM 002-0504-00 and 057-0790-00
• Cross-references RPI MIK080; all three components in one kit
• Quantity: 1 per Pack

DCI International Sterilizer M11 Door Gasket Kit with Dam is used for replacing the complete door sealing assembly on Midmark M11 and M11D autoclaves when the door gasket, dam gasket, or hoop components have worn, degraded, or failed to the point where the autoclave cannot maintain the chamber pressure and temperature parameters required for a complete and validated sterilization cycle. The M11 door gasket system uses three components working together to create the chamber seal at the autoclave door: the door gasket that provides the primary circumferential seal between the door and the chamber face ring, the dam gasket that provides an additional water and steam barrier at the door seal area, and the hoop that retains the gasket within its channel on the door assembly during repeated open and close cycles throughout the autoclave's service life.

Replacing all three components together as a complete kit rather than replacing individual components one at a time ensures that the entire door sealing system is restored to full performance with matched new components rather than mixing a new gasket with an aged dam or worn hoop that could undermine the overall door seal integrity after the repair. Sterilization coordinators, dental assistants, equipment technicians, and practice managers who maintain Midmark M11 and M11D autoclaves as part of their dental practice sterilization equipment maintenance program find DCI International Sterilizer M11 Door Gasket Kit the complete 3-piece DCI-manufactured OEM-specification door gasket, dam, and hoop replacement kit for their active Midmark M11 autoclave maintenance program. ? Each pack contains 1 complete DCI International Sterilizer M11 Door Gasket Kit including 1 door gasket, 1 dam gasket, and 1 hoop, providing all three door sealing components needed for a complete M11 door seal replacement in a single kit purchase. DCI International manufactures this kit to meet the original Midmark OEM specifications for the M11 and M11D door sealing assembly, providing a DCI-manufactured aftermarket replacement that performs to the same dimensional and material standards as the Midmark OEM components.

The DCI part number 2195 cross-references to Midmark OEM part numbers 002-0504-00 and 057-0790-00, and RPI part number MIK080, supporting procurement verification when ordering the replacement gasket kit for the specific Midmark M11 or M11D autoclave model in service. ? DCI International Sterilizer M11 Door Gasket Kit works through the coordinated function of its three door sealing components where the door gasket provides the primary pressure seal at the chamber face ring contact, the dam provides the secondary water and condensate barrier at the door assembly seal area to prevent moisture intrusion behind the primary gasket surface, and the hoop retains the door gasket in its correct seated position within the door gasket channel during the autoclave door open and close cycle and during the pressurized sterilization cycle operation. Replacing all three components simultaneously with a complete kit eliminates the risk of partial seal failure from a mismatched component assembly where one aged component compromises the overall door seal performance after repair. The kit components are dimensionally matched to the Midmark M11 and M11D door assembly specifications confirmed by the OEM cross-reference to Midmark part numbers 002-0504-00 and 057-0790-00. ? Sterilization coordinators who observe Midmark M11 autoclave cycle failures, pressure loss errors, or steam leakage at the door margin during sterilization cycle operation find the DCI 2195 gasket kit provides the complete door seal component replacement needed to restore autoclave chamber pressure integrity without purchasing components individually.

Equipment technicians who perform scheduled preventive maintenance on Midmark M11 autoclaves replace the door gasket kit as a complete assembly at periodic maintenance intervals to maintain sterilization cycle reliability before individual component failure occurs. ? DCI International Sterilizer M11 Door Gasket Kit with Dam gives dental practices a DCI-manufactured, OEM-specification three-piece door seal kit including door gasket, dam gasket, and hoop for Midmark M11 and M11D autoclaves, restoring complete door seal integrity for reliable sterilization cycle performance, replacing Midmark OEM parts 002-0504-00 and 057-0790-00, 1 kit per pack.