$43.47

• For Tuttnauer 2540, 2540M, 2540E, EZ10, and EZ10K models
• DCI-manufactured; meets Tuttnauer OEM specifications
• Replaces Tuttnauer OEM part 02610023; cross-ref RPI TUG003
• Green silicone; 10" (25 cm) diameter door gasket seal
• Restores autoclave door seal integrity for sterilization
• Quantity: 1 per Pack

DCI International Sterilizer Door Gasket Seal, Tuttnauer 2540 Series is used for replacing the worn, degraded, or failed door gasket seal on Tuttnauer 2540 series autoclaves including the 2540, 2540M, 2540MK, 2540E, 2540EA, 2540EK, EZ10, and EZ10K models when the existing door gasket no longer provides the airtight chamber seal needed to maintain the autoclave's pressure and temperature parameters during the sterilization cycle. The door gasket is the rubber seal that compresses between the autoclave chamber door and the chamber face ring during the door closure and pressurization sequence, creating the pressure-tight seal that allows the autoclave to build and maintain the steam pressure and temperature required for instrument sterilization according to the programmed sterilization cycle parameters.

A worn, cracked, or deformed door gasket that fails to maintain the airtight seal at the chamber door can cause cycle failures, pressure loss during the sterilization cycle, incomplete sterilization of the instrument load, and autoclave error codes that interrupt the sterilization cycle before completion. Sterilization coordinators, dental assistants, equipment technicians, and practice managers who maintain Tuttnauer 2540 series autoclaves as part of their dental practice sterilization equipment program find DCI International the 10-inch green silicone OEM-specification 2540 series door gasket for their active Tuttnauer 2540 autoclave maintenance program. ? Each pack contains 1 individual DCI International Tuttnauer 2540 Series Door Gasket Seal at 10 inches diameter, providing the single replacement gasket unit for installation in the Tuttnauer 2540 series autoclave door gasket channel during a door gasket replacement service event. DCI International manufactures this door gasket to meet the original Tuttnauer manufacturer's specifications for the 2540 series door gasket, providing a DCI-manufactured aftermarket replacement that performs to the same dimensional and material standards as the Tuttnauer OEM part number 02610023.

The DCI part number 2107 cross-references to Tuttnauer OEM part 02610023 and RPI part number TUG003, supporting procurement verification when ordering the replacement gasket for the specific Tuttnauer 2540 series autoclave model in service. ? DCI International Tuttnauer 2540 Series Door Gasket works through its green silicone elastomer construction where the 10-inch diameter gasket seats within the door gasket channel in the Tuttnauer 2540 autoclave door, compressing against the chamber face ring surface as the door is closed and locked to create the circumferential seal that maintains the steam pressure within the autoclave chamber during the sterilization cycle. Silicone elastomer provides the heat resistance and chemical resistance needed for a door gasket material that is repeatedly exposed to high-temperature steam, autoclave chamber pressure, and sterilization cycle temperatures across thousands of sterilization cycles throughout the gasket's service life. The DCI gasket's dimensional conformance to Tuttnauer OEM specifications ensures the replacement gasket seats correctly within the 2540 series door gasket channel and provides the same sealing surface contact geometry as the original factory gasket, maintaining the autoclave's cycle performance and pressure parameters after gasket replacement. ? Sterilization coordinators who notice autoclave door seal failure symptoms including pressure loss during sterilization cycles, visible steam leakage at the door margin during cycle operation, or autoclave error codes indicating incomplete pressure build find the DCI 2540 series door gasket the appropriate replacement gasket for restoring the door seal integrity on the Tuttnauer 2540 series models in their sterilization area.

Equipment technicians who perform scheduled preventive maintenance on Tuttnauer 2540 autoclaves replace the door gasket as part of a periodic preventive maintenance protocol to maintain cycle reliability before gasket failure occurs during a clinical sterilization cycle. ? DCI International Sterilizer Door Gasket Seal, Tuttnauer 2540 Series gives dental practices a DCI-manufactured, OEM-specification-compliant, green silicone 10-inch door gasket replacement for Tuttnauer 2540, 2540M, 2540MK, 2540E, 2540EA, 2540EK, EZ10, and EZ10K autoclaves, restoring door seal integrity for reliable sterilization cycle performance, replacing Tuttnauer OEM part 02610023, 1 gasket per pack.