A convenient and sanitary replacement for existing traps Guarantees improved suctioning action Prevents cross-contamination Single-use only to help staff save time in cleaning A Disposable Trap replaces the current trap filter of a technician's evacuation unit. It lessens contact with infectious materials while enhancing the performance of suction systems. Dispose of after one application to eliminate the need for hazardous and tedious clean-up of filters. Available in various shapes and sizes.

Read more less

Four 64 oz bottles support routine maintenance Neutral pH of 6-8 meets Dental Rule guidance Microbial formula dissolves line debris on contact Works with wet and dry dental vacuum systems Compatible with all amalgam separator systems Quantity: 4 bottles, 64 oz each, per Case Solmetex PowerScrub Vacuum Line Cleaner Case Kit, 64 oz x 4/Case is used for daily cleaning and maintenance of dental evacuation lines where accumulated organic debris can reduce suction efficiency and interfere with connected equipment. The microbial concentrate releases enzymes that begin dissolving vacuum line debris on contact and continue working while the solution remains in the lines overnight.Its biodegradable formulation supports routine use without hot water and works across different water temperatures. By helping keep evacuation tubing cleaner, PowerScrub supports dependable suction performance, cleaner internal line surfaces, and more consistent maintenance of compatible vacuum systems and amalgam separators. This makes it suitable for preventive maintenance rather than waiting until suction problems develop. Each case contains four 64 oz bottles of concentrated PowerScrub cleaner.One fluid ounce of concentrate is mixed with 32 fluid ounces of water to prepare a working solution for one operatory, giving each bottle up to 64 standard operatory cleanings when used according to the stated dilution. The formula has a neutral pH between 6 and 8 and is compatible with both wet-ring and dry dental vacuum systems. It is also compatible with amalgam separators, including Solmetex NXT Hg5 systems.Practices looking to buy dental vacuum line cleaner can use the four-bottle case format to support consistent daily maintenance across multiple operatories. PowerScrub works through a microbial formulation that releases targeted enzymes into the diluted solution. Once drawn through low-volume and high-volume evacuation lines, the solution contacts debris inside the tubing and continues cleaning overnight before rinsing away during subsequent use. The product does not require hot water and is designed to work at any water temperature.It is also non-foaming, helping it integrate into dental suction systems without creating excessive foam. As a neutral-pH evacuation cleaner, it supports amalgam separator workflows while helping optimize collection container capacity and reduce buildup within connected vacuum lines. Dental assistants, hygienists, office managers, and equipment coordinators can incorporate PowerScrub into end-of-day maintenance protocols for operatories using saliva ejectors, high-volume evacuation lines, wet vacuums, dry vacuums, and compatible amalgam separators. Staff can measure the required concentrate, dilute it with water, and draw the mixed solution through the evacuation system using the appropriate dispenser and manufacturer procedure.The four-bottle case is particularly useful for practices managing several treatment rooms or maintaining a standardized cleaning routine across the facility. Solmetex identifies PowerScrub as the recommended vacuum line cleaner for its NXT Hg5 amalgam separator series. Solmetex PowerScrub Vacuum Line Cleaner Case Kit combines four 64 oz bottles, neutral-pH chemistry, biodegradable microbial action, and broad dental vacuum compatibility in one case configuration. Each bottle provides concentrated cleaner for repeated operatory use, while the overnight action supports a predictable maintenance routine without adding complicated preparation steps. The case format helps practices maintain adequate supply for regular cleaning across multiple rooms and reduces the frequency of replenishment compared with a single bottle. Professionals ready to order dental vacuum line cleaner can select this case kit for consistent use with wet or dry vacuum systems and compatible amalgam separators.

Read more less

For Midmark M9 and M11 autoclaves; fill and vent screens Mesh style; replaces Midmark OEM part 002-0360-00 Required for autoclave operation; must not be omitted Part of Midmark M9 and M11 monthly maintenance protocol Cross-references RPI MIF062; DCI-manufactured Quantity: 2 per Pack DCI International Midmark Fill and Vent Chamber Screen Filters are used for replacing the mesh screen filters at the fill and vent positions within the Midmark M9 and M11 autoclave steam sterilizers as part of the required monthly maintenance protocol for these units where the screen filters trap particulate debris and scale deposits from the chamber water during the sterilization cycle, preventing the fill and vent valve seats and orifices from becoming blocked by debris that could interrupt correct chamber filling, venting, and pressure management during the sterilization cycle sequence. The fill and vent chamber screen filters are a required component of the Midmark M9 and M11 autoclave's water management system and the sterilizers must not be operated without the filters in place, as confirmed by Midmark's own maintenance documentation, making replacement of these screen filters at the recommended maintenance interval a necessary part of maintaining the autoclave's operational compliance and sterilization cycle reliability.Mesh style construction provides the open screen geometry that allows water to flow freely through the filter during the chamber fill and vent cycle steps while trapping particulate debris from the chamber water supply at the filter mesh surface, preventing debris from reaching the valve seats and orifices at the fill and vent positions within the autoclave's hydraulic circuit. Sterilization coordinators, dental assistants, and equipment technicians who maintain Midmark M9 and M11 autoclaves and perform the monthly maintenance protocol required by Midmark find DCI International Midmark Fill and Vent Chamber Screen Filter the mesh-style OEM-specification 2-pack replacement screen filter for their active Midmark M9 and M11 autoclave maintenance program. ? Each pack contains 2 individual DCI International Midmark Fill and Vent Chamber Screen Filters in mesh style, providing the pair of replacement filters needed for replacing both the fill position screen and the vent position screen in the Midmark M9 or M11 autoclave during the monthly maintenance procedure. DCI International manufactures this screen filter to meet the original Midmark OEM specification for the M9 and M11 fill and vent chamber screens, providing a DCI-manufactured aftermarket replacement that performs to the same mesh dimensions and flow characteristics as the Midmark OEM part number 002-0360-00.The DCI part number 2320 cross-references to Midmark OEM part 002-0360-00 and RPI part number MIF062, supporting procurement verification when ordering the replacement screen filters for the Midmark M9 or M11 autoclave in service. ? DCI International Midmark Fill and Vent Chamber Screen Filters work through their mesh screen construction where the filter is seated at the fill and vent positions within the autoclave's internal water circuit and allows water flow through the open mesh openings during the chamber fill and vent steps while the mesh captures particulate scale, mineral deposits, and debris from the water flowing through the screen during each sterilization cycle. Over time, accumulated deposits and debris on the screen mesh surface restrict the screen's flow capacity and require the screen to be replaced at the maintenance interval to restore unrestricted flow through the fill and vent circuit. The mesh style screen construction provides the required flow-through geometry for the Midmark M9 and M11 fill and vent positions and is the correct filter type confirmed by the Midmark OEM part number cross-reference. ? Sterilization coordinators who perform the monthly maintenance protocol for their Midmark M9 and M11 autoclaves and include fill and vent screen replacement in the monthly maintenance checklist find the 2-pack format provides both replacement screens needed for the M9 or M11 filter replacement step within a single pack.Equipment technicians who perform preventive maintenance service on Midmark M9 and M11 autoclaves include fill and vent screen replacement as a standard step in the monthly preventive maintenance procedure. ? DCI International Midmark Fill and Vent Chamber Screen Filters give dental practices a DCI-manufactured, OEM-specification mesh-style replacement screen filter for the fill and vent positions of Midmark M9 and M11 autoclaves, cross-referencing Midmark OEM part 002-0360-00 and RPI MIF062, required for autoclave operation and monthly maintenance compliance, in a 2-filter pack.

Read more less

A convenient and sanitary replacement for existing traps Guarantees improved suctioning action Prevents cross-contamination Single-use only to help staff save time in cleaning A Disposable Trap replaces the current trap filter of a technician's evacuation unit. It lessens contact with infectious materials while enhancing the performance of suction systems. Dispose of after one application to eliminate the need for hazardous and tedious clean-up of filters. Available in various shapes and sizes.

Read more less

Reduces exposure to toxic waste Helps prevent cross-contamination Single-use only to eliminate clean-up time Easy to install and remove Evacuation Canister offers a lid, gasket, and mesh filter with internal threads to contain evacuated fluids and isolate infectious materials present. It allows hassle-free installation and removal from the evacuation unit. Disposable to promote maximum asepsis. Available in multiple sizes and compatible with various evacuators.

Read more less

Gentler design for increased comfort Effectively provides a dry worksite High-quality composition ensures durability Disposable for maximum asepsis Comfort Plus Premium Saliva Ejector offers reliable form maintenance, while the deliberate placement of suction port optimizes performance for smooth liquid flow with minimal debris. Soft, fixed tips prevent mucosal tissue injury and increase patient security and ease. Crosstex Saliva Ejector comes in various color combinations, in scented or unscented.

Read more less

Use with high-volume evacuators Reduces the risk of tissue lock 75" Short???measures 3.75" Vent-O-Vac Disposable HVE Tip offers soft-touch plastic material to protect soft tissue and guarantee patient comfort. It features unique side vents and an S-shaped edge. Available in 3.75 or 5 inches.

Read more less